HomePolicies & Regulations ›MNRE Issues Draft Revised Guidelines for Installation of Prototype Wind Turbine Models

MNRE Issues Draft Revised Guidelines for Installation of Prototype Wind Turbine Models

The Ministry of New and Renewable Energy (MNRE) has issued draft revised guidelines to streamline the installation and type testing of prototype wind turbine models for grid synchronisation in India.

April 14, 2025. By Mrinmoy Dey

Ministry of New and Renewable Energy (MNRE) has issued draft revised guidelines for installation of prototype wind turbine models. These guidelines are aimed at streamlining the process for wind turbine manufacturers seeking to test and certify new models for synchronisation with the Indian grid.

The draft guidelines mandate that prototype installations will only be permitted for the purpose of type testing to obtain type certification from internationally accredited certifying agencies. MNRE has recommended that land for these installations be allocated on a ‘footprint basis’ to optimise land use.

The prototype certificate for such models will be valid for a maximum of three years, during which the testing and certification must be completed in line with globally accepted standards such as IECRE OD 501 and IS/IEC 61400-22:2010.

Type testing must be conducted exclusively by internationally accredited bodies, and the prototype certificate must be submitted to the National Institute of Wind Energy (NIWE).

As per the provisions of the draft guideline, prototype wind turbines must be commissioned and grid-synchronised within 18 months of NIWE's recommendation letter.

“Regular maintenance and service shall be carried out for the prototype wind turbines installed. The type certification body will provide a letter at the end of the year regarding regular operation and maintenance of prototype wind turbines. Failing which the wind turbines are liable to be disconnected from the grid,” stated MNRE in a notification.

It further added that all prototype turbines must be commissioned within three years and cannot be sold or transferred until the model is included in the Revised List of Models and Manufacturers (RLMM).

Only new and unused components may be used in the manufacturing of prototype turbines. “However, the changes/modification to the already installed prototype wind turbine will be allowed,” clarified the notification.

The guidelines also clarify that given the availability of higher-capacity turbines like 5.2 MW in the market, it is preferable to specify the number of prototype units rather than total MW capacity.
  Download the attached file
Please share! Email Buffer Digg Facebook Google LinkedIn Pinterest Reddit Twitter
If you want to cooperate with us and would like to reuse some of our content,
please contact: contact@energetica-india.net.
 
 
Next events
 
 
Last interviews
 
Follow us